Wet Sounds HT 4 Full Range 4 Channel Class D Amplifier

Wet Sounds™ Hydro‐Tech™ Series Marine Amplifiers are designed to be a complete solution for every type ofextreme marine application. The Hydro‐Tech amplifiers use superior performance circuitry by utilizing Class Power Supplies. These amplifiers have extreme power output packed inside a small chassis, thermal overload protection, flexible crossovers, optional elevated feet, extended inputs. Hydro‐Tech™ amplifiers are a well balanced match for all of the Wet Sounds™ products.

$649.00

The HT-4 is a high powered marine 4 ch full range class d amplifier that allows you to configure it to power any combination of speakers systems. The HT-4 can run multiple Marine Speakers, Marine Speakers and subwoofers, Marine Speakers and tower speakers, tower speakers and subwoofers, multiple subwoofers or used to power tower speakers.  High Pass, Low pass  and Full range crossover selection on all channels with bass boost adjustment  increase the flexibility.  Adding to the feature set is RCA input summing that allows you to attach one set of RCA’s to drive all channels or separate the amp into 2 RCA inputs. This makes it very simple to wire and configure the amplifier without the need for additional RCA Y-adapters. Removable power/ground and speaker wire plugs giving you easier installation for wiring up the amplifier in tight spaces.

Removeable Wire Plugs

Full Range Class D

Conformal Coated PCB

Completely Sealed Salt Water Compliant High Mass Heat Sink

Stainless Steel Hardware

Microprocessor Controlled

Thermal Overload & Short Protection

Wet Sounds Extensive Crossover Network 

Back Lit Logo Badge Horizontal or Vertical Placement

Removable Wiring and Control Covers

Accent Stripes for Customization 

Snap on Mounting Feet for Raised Mounting


Specifications

  • RMS Power @ 4 ohm Stereo 110 x 4
  • RMS Power @ 2 ohm Stereo 150 x 2
  • RMS Power @ 4 ohm Mono 300 x 2
  • RMS Power @ 2 ohm Mono N/A
  • Input Sensitivity Variable from 200mV to 5V
  • Frequency Response 10Hz-20kHz
  • Bass Boost 0db - 12db
  • High-Pass Crossover Frequency 50Hz - 250Hz 
  • Low-Pass Crossover Frequency 50Hz-250Hz 
  • THD @ 4ohm <.08 
  • THD @ 2ohm <.08 
  • Signal To Noise Ratio >95dBa 
  • Idle Current Rating 1.7 A 
  • Max Current Rating 50A 
  • Crossover Type Switchable Hi/Lo/Full 
  • Turn on Delay 4S 
  • Operating Voltage 10V-16V

Download User Manual