High-Quality Components Make An Audible Difference
- Superior PTD™ Pure-Titanium Tweeter Domes are Ferro-fluid damped and cooled to ensure smooth high-frequency performance with amazing clarity across a wide listening area.
- Pocketed screw holes help to hold the drill steady, making installation a snap.
- Easy-access Binding Posts feature a larger wire access hole and connect via banana plug, pin or bare wire.
- Rigid ABS clamps cut down on installation time and simplifying installation.
- Superior Mineral-Filled Polypropylene Bass/Midrange Cones with oversized computer-optimized ferrite magnets and high-power motor structures deliver detailed midrange performance with clean, extended bass. Even movie dialog is incredibly clean and clear.
- NEW Bezel-Free Micro-Perf Grilles.
- Magnetically attached grilles: neodymium magnets hold grilles firmly in place.
- No masking required—this makes the grilles faster and easier to paint, if painting is desired.
A Behind-the-Ceiling Look at Our ABS Clamps
Without any unnecessary pressure or force, each turn of the screwdriver turns the clamp. We show the starting point, we show the screwdriver working to turn the clamp, and finally, we show the speaker locked into place inside the wall or ceiling. It doesn't get simpler or easier!
A Solid Installation
Our High-Strength ABS Chassis and Clamp System addresses the flexibility problem that plagues all walls and ceilings. ABS stiffness combats unwanted resonances and vibrations and equally important, the new clamp design makes the installer's job easier and faster!
- Tweeter Technology
Pure-Titanium Tweeter Dome (PTD™) •
X-PAL™ Tweeter with Exclusive Perforated Phase-Aligning (PPA™) Tweeter Lens • •
Reduced Edge Diffraction (RED™) Technology (Patent Pending) with Added Heat Dissipation • •
- Bass/Midrange Technology
Mineral-Filled Polypropylene Cone • •
Patented Active Ridge Technology (ART™) • •
X-PAL™ Brushed Pure-Aluminum Cone Driver •
Die-Cast Aluminum Chassis • •
Oversized, High-Power-Handling Voice Coil •
Dual-Directional Soundfield™ Model • •
30°-Angled Guided Soundfield™ Model • • •
Bezel-Free Micro-Perf Grille • • •
Rigid ABS Clamps •
Die-Cast Aluminum Clamps • •
Translucent Polycarbonate Cover protects against dust and insulation • •
Designed and Manufactured in our Canadian Facility
2-driver, 2-way in-wall, ABS chassis & mounting clamps
2nd-order electro-acoustic at 2.5 kHz
- Frequency Response On-Axis
±2 dB from 70 Hz - 20 kHz
- Frequency Response 30° Off-Axis
±2 dB from 70 Hz - 18 kHz
- High Frequency Driver
3/4" (1.9cm) PTD™ dome
- Mid/Bass Frequency Driver
6.5" (16.5cm) mineral-filled polypropylene cone
- Low Frequency Extension
- Sensitivity Room / Anechoic
89 dB / 85 dB
Compatible with 8 ohms
- Suitable Amplifier Power Range
- Maximum Input Power
White, paintable grille
3.5 lbs. (1.6 kg)
- Overall Dimensions
11.125" (28.3cm) Height
8.125" (20.6cm) Width
- Cut-Out Dimensions
10.125" (25.7cm) Height
7.0625" (18cm) Width
- Minimum Mounting Depth
Depth required is the distance
between 1/2" drywall, or similar material.