Excelon Performance & Quality
eXcelon products incorporate the latest technologies and deliver the highest sonic performance. From advanced audio tuning capabilities, crossover and equalizer systems, high voltage preouts and two-year warranty, eXcelon represents the very best product available.
Small Footprint Design
Reference-Fit amplifiers are Kenwood’s best sounding amps and have one of the smallest footprints in their class, making them the perfect solution for vehicle installation where space is at a premium. This compact size was made possible by the development of a high-density mount circuit board in conjunction with an enhanced air cooling and heat control systems. Kenwood’s created a compact amplifier that enables installation in tight locations previously restricted to lower performance amps. This is ideal for users who do not wish to sacrifice space or prefer a stealth installation.
Variable Low-Pass Filter
Filters high frequencies out of the music and improves efficiency and sound quality by allowing only the low frequencies to pass to the subwoofer.
Gold-Plated Line Input Terminals
This type of connector is non-corrosive and will maintain conductivity for long periods of time. Gold-plated connectors inherently have lower contact resistance resulting in wider frequency response, lower distortion with improved dynamic range and signal to noise ratio.
These HEX-type terminals can accommodate up to AWG 4 - AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle's battery. The HEX type design allows for maximum tightening and contact onto the wire.
Speaker Output Terminals
These HEX-type terminals can accommodate up to AWG 8 - AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire.
- Operating Voltage: 14.4V (11 - 16 V allowable)
- Current Consumption: 46 A
- Dimensions (W x H x D): 220 x 35 x 169 mm (8-11/16 x 1-3/8 x 6-5/8)
- Weight: 1.6 kg (3.5 lbs)
- Warranty: 2-Year
|CEA-2006 Standard||400 W x 1||RMS Watts per channel @ 4 ohms, 1% THD+N|
|78 dBA||Signal to Noise Ratio (Reference: 1 Watt into 4 ohms)|
|Max Power Output||-|
|Rated Power Output||14.4 V|
|400 W x 1||(4Ω) (20 Hz - 200 Hz, 1.0% THD)|
|600 W x 1||(2Ω) (100 Hz, 1.0% THD)|
|Input Sensitivity||0.2 V - 5.0 V (MIN-MAX)|
|Input Impedance||10 kΩ|
|Signal to Noise Ratio||100 dB|
|Low Pass Filter Frequency||(-24 dB/oct.)|
|50 Hz - 200 Hz (variable)||Low-Pass Filter Frequency|
|High Pass Filter Frequency||-|
|Dimensions (W x H x D)||220 x 35 x 169 mm (8-11/16 x 1-3/8 x 6-5/8)|