Kenwood PXW1000BC Truck Box Enclosure with KFCXW1000F

  • 10" 4-ohm shallow-mount subwoofer
  • Carbon-glass fiber composite cone with butyl rubber surround
  • Cast aluminum basket
  • Power range: 50-250 watts RMS
  • Peak power: 1,000 watts
  • Frequency response: 35-800 Hz
  • Sensitivity: 90 dB
  • Mounting depth: 3-3/8"
  • Sealed box volume: 0.6 cu. ft.
  • Ported box volume: 0.6 cu. ft.
  • $339.00 $369.00


    Overview

    Features

    Flat Subwoofer: The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in the tightest of spaces such as behind or under the seat of a pickup truck.

    Carbon-Glass Fiber Cone: The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time.

    Rubber Surround: The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response.

    Super Linear Spider: The flat woofer utilizes a super linear spider for maximum control over the woofer's linear motion to improve overall sound quality.

    Heat Transfer System: The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the woofer cool.

    Aluminum-Cast Basket: The woofer is housed in a cast-aluminum basket for increased rigidity and long-lasting reliability.

    Spring Terminals: The flat woofer utilizes a pair of silver-plated spring terminals on one side of the woofer for connection to your amplifier's speaker wiring. The spring terminals will accept up to 10 AWG speaker wire.

    Concealing Ring: The eXcelon woofer comes supplied with a removable, rubber concealing ring used to hide the woofer's mounting screws for a neat and professional looking installation. The concealing ring increases the top mounting height to 1".

    Enclosure Compatibility

    Sealed BoxVolume: The sealed box size recommended by Kenwood is 0.6 cu/ft.

    Vented Box Volume: The vented box size recommended by Kenwood range is 0.6 cu/ft. One 3" diameter x 11" long port should be used with a 0.6 cu/ft enclosure.

    Size 10-inch
    Impedance 4 ohms
    Cone Material Carbon-glass fiber
    Surround Material Butyl rubber
    Ideal Sealed Box Volume (cubic feet) 0.6
    Ideal Ported Box Volume (cubic feet) 0.6
    Port diameter (inches) 3
    Port length (inches) 11
    Free-Air No
    Dual Voice Coil No
    Sensitivity 90 dB at 1 watt
    Frequency Response 35 - 800 Hz
    RMS Power Range (Watts) 50-250
    Peak Power Handling (Watts) 1000
    Top Mount Depth (inches) 3 3/8
    Bottom Mount Depth (inches) 3 15/16
    Cutout Diameter or Length (inches) 9 1/8
    Vas (liters) 21.05
    Fs (Hz) 38.6
    Qts 0.72
    Xmax (millimeters) 7.5