Kenwood KAC-M3001 Compact Mono Digital Amplifier - Advance Electronics

Kenwood KAC-M3001 Compact Mono Digital Amplifier

  • RMS POWER Output 4Ω: 200W x 1
  • RMS POWER Output 2Ω: 300W x 1
  • RMS POWER Output Bridged: 150W x 2
  • Dimensions(WxHxD): 5-11/16" x 1-3/4" x 3-7/8"
  • Singal Sensing Turn-on
  • Conformal Coating *1

*1: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

 

$229.00

Multi-Appliciation

Many of today’s powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. Kenwood’s compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.


Specifications

Title Compact Mono Digital Amplifier
Amplifier Type Class D
CEA-2006 Primary Ratings Power Output 200 Watts RMS x 1 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio 78dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output 600W
Specifications Signal to Noise Ratio 97dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 20 Hz-200Hz (+0dB, -3dB)
Input Impedance 10k ohm
Speaker Impedance 4Ω (2Ω to 8Ω allowable)
Bridged connection -
Audio Section Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
High-Pass Filter -
Filter Selector 1 -
RCA Input Sensitivity 0.2 V - 5.0 V
Speaker Level Input Sensitivity 4.0 V - 12.0 V
Terminals Battery & Ground Screw Type Terminal Block (Ni) (M4)
Speaker Output MOLEX Connector with AWG16 200mm Wire
Line In RCA (Ni)
General Dimensions(WxHxD) '5-11/16 X '1-3/4 X '3-7/8 inch
Weight(kg) -
Operating Voltage 14.4V(11-16V allowable)
Current Consumption 20 A
Key Features

CEA-2006 Compliant
Class D
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design

Others

Triangle Indicator